Solved Hisense Dehumidifier Repair Questions & Tips (2024)

Question edited for clarity and spelling of maker name.Question moved from Computers and Internet category.Faulty Sensorhttps://www.google.com/search?q=hisense+model+dh7019kig+e9+error+code..

7/29/2022 8:20:36 PM •Hisense 70-Pint...•Answeredon Jul 29, 2022•2,981 views

8/5/2015 1:06:50 AM •Hisense 35-Pint...•Answeredon Aug 05, 2015•436 views

https://www.repairclinic.com/Shop-For-Parts/a14c9/Dehumidifier-Blower-Wheel-Fan-Blade-Parts

https://www.manualslib.com/products/Garrison-043-6121-4-8670428.html

7/17/2024 8:04:15 PM •Dehumidifiers•Answeredon Jul 17, 2024•1,323 views

Using the Polar Wind Dehumidifier PN: MDUDP-22AEN1-BA7 involves a straightforward process.Here's a step-by-step guide to help you get started:

Setup and Initial Use

1. Placement:
   • Choose a location where the dehumidifier is needed, preferably near a power outlet and away from obstacles that could block airflow.
   • Ensure there is at least 6-12 inches of space around the unit for optimal air circulation.
2. Power Connection:
   • Plug the dehumidifier into a standard electrical outlet. Make sure the outlet is properly grounded.
   • Check that the power cord is not damaged.

Operating the Dehumidifier

1. Turning On the Unit:
   • Locate the power button on the control panel of the dehumidifier.
   • Press the power button to turn on the unit. The display panel should light up, indicating that it's operational.
2. Setting the Desired Humidity Level:
   • Use the humidity control buttons (usually marked as '+' and '-') to set your desired humidity level. The typical range is between 30% to 80% relative humidity (RH).
   • The dehumidifier will work to maintain the set humidity level by automatically turning on and off as needed.
3. Selecting Operating Modes:
   • Some models may have different operating modes such as Normal, Continuous, or Turbo. Refer to the user manual for your specific model to understand the available modes.
   • Use the mode button to select the desired operating mode based on your needs.

6/22/2024 11:44:16 AM •Dehumidifiers•Answeredon Jun 22, 2024•18 views

5/10/2024 8:48:12 PM •Dehumidifiers•Answeredon May 10, 2024•285 views

Question edited for clarity (drawer) and add maker.float switch or sensor is sticking.https://www.google.com/search?q=dehumidifier+WDH-316DB+red+light+flashing..

5/8/2024 5:21:29 PM •Dehumidifiers•Answeredon May 08, 2024•20 views

Clean the air filter of dust and debris.https://www.google.com/search?q=Idylis+dehumidifier+with+pump+getting+an+E2+code..

4/16/2024 4:48:03 PM •Dehumidifiers•Answeredon Apr 16, 2024•37 views

3/31/2024 6:13:56 PM •Dehumidifiers•Answeredon Mar 31, 2024•32 views

The Units are made in the Far East and are often sold under different maker names but retaining all or part of the model number. Here is the manual sold by Evantair. It has a compressor.https://www.manualslib.com/manual/1016879/Evantair-Wdh-816eah.html#manual..

2/28/2024 5:23:57 PM •Dehumidifiers•Answeredon Feb 28, 2024•43 views

1/30/2024 7:01:35 PM •Dehumidifiers•Answeredon Jan 30, 2024•43 views

1/28/2024 2:26:03 AM •Dehumidifiers•Answeredon Jan 28, 2024•42 views

11/9/2023 4:20:38 PM •Dehumidifiers•Answeredon Nov 09, 2023•72 views

Question edited for a lot more clarity, add maker, fix English.It sounds like a refrigeration issue like low gas. There are various idea here, but you probably need to drop it off at a refrigeration service centre.https://www.google.com/search?q=gd2005+dehumidifier+starts+and+stops+working..

10/22/2023 4:13:29 PM •Dehumidifiers•Answeredon Oct 22, 2023•68 views

9/24/2023 12:44:04 PM •Dehumidifiers•Answeredon Sep 24, 2023•734 views

It sounds like the switch needs to be replaced or adjusted.https://www.google.com/search?q=Haier+Dehumidifier+says+bucket+fullNeed model number. That is needed in all Fixya questions.https://www.google.com/search?q=haier+dehumidifier+parts+list..

9/6/2023 1:26:48 AM •Dehumidifiers•Answeredon Sep 06, 2023•63 views

Not listed....ck here.....https://www.cpsc.gov/Recalls/2023/Gree-Recalls-1-56-Million-Dehumidifiers-Due-to-Fire-and-Burn-Hazards-Reports-of-At-Least-23-Fires

8/26/2023 10:54:09 PM •Dehumidifiers•Answeredon Aug 26, 2023•93 views

If water is coming out on the floor from your Comfort Site dehumidifier even when the bucket is not overflowing, there may be a few possible causes for this issue:

1. Improper Placement of the Bucket: Ensure that the bucket is correctly positioned and inserted into the dehumidifier. Make sure it is securely in place, and the water outlet on the bucket is aligned with the dehumidifier's drainage system. If the bucket is not properly seated or aligned, it can result in water leakage.
2. Bucket Seal or Gasket: Check the bucket's seal or gasket for any signs of damage, wear, or misalignment. If the seal is compromised or not making proper contact with the dehumidifier's body, water can escape and leak onto the floor. Clean the seal and ensure it is free from debris or obstructions. If necessary, replace the seal or gasket with a compatible replacement part.
3. Drainage Hose Connection: Some dehumidifiers have the option to connect a drainage hose directly to the unit for continuous draining. If a drainage hose is connected, make sure it is securely attached and there are no leaks or loose connections along the hose. Ensure that the other end of the hose is properly directed into a drain or receptacle.
4. Internal Drainage System: The dehumidifier's internal drainage system, including the collection tray or drain pan, may be clogged or blocked. Remove the bucket and inspect the drainage area for any debris, buildup, or blockages. Clean the drainage system thoroughly, ensuring that water can flow freely from the collection tray into the bucket without any obstructions.
5. Check for Excessive Humidity: If the dehumidifier is operating in an area with extremely high humidity levels, it may struggle to remove moisture effectively. This can result in excessive condensation or water buildup that leads to leakage. Consider using additional dehumidification methods or addressing the underlying humidity issue in the space.

If the issue persists after checking these potential causes, it is advisable to consult the user manual for your specific Comfort Site dehumidifier or contact the manufacturer's customer support for further assistance. They can provide specific troubleshooting steps or offer guidance based on their knowledge of the product.

7/15/2023 2:08:39 PM •Dehumidifiers•Answeredon Jul 15, 2023•196 views

The easy way is to turn it upside down. Leave 12 hours before turning back on.Or you can removed the back panel and then the side panels. The screws are hidden under small removeable plugs.Or you can use one of these to reach in and grab it.https://www.walmart.ca/en/ip/Agiferg-Flexible-Long-Reach-Claw-Pick-Up-Narrow-Bend-Curve-Grabber-Tool-Spring-Grip-80cm/1Z9FN1CNSYCW..

7/8/2023 11:44:05 PM •Dehumidifiers•Answeredon Jul 08, 2023•54 views

If your Norpole dehumidifier is repeatedly starting and stopping, it could indicate a problem that needs to be addressed. Here are a few troubleshooting steps you can try:

1. Check the humidity settings: Ensure that the humidity level set on the dehumidifier is reasonable and not too low. If the desired humidity level is already reached, the dehumidifier may turn off until the humidity rises again.
2. Clean the air filter: A dirty or clogged air filter can restrict airflow and cause the dehumidifier to overheat. Turn off the dehumidifier, unplug it, and locate the air filter. Remove the filter and clean it according to the manufacturer's instructions. Allow it to dry completely before reinstalling it.
3. Check the water collection bucket: If the water collection bucket is full, the dehumidifier may automatically shut off. Empty the bucket and ensure it is properly positioned back into the unit.
4. Verify the drainage system: If your dehumidifier is equipped with a continuous drainage option, make sure the drainage hose is properly connected and not clogged. If the drainage hose is obstructed or improperly installed, it can cause the dehumidifier to turn on and off.
5. Ensure proper ventilation: Make sure the dehumidifier is placed in a well-ventilated area. Restricted airflow around the unit can lead to overheating, triggering the auto shut-off feature.
6. Power supply issues: Check the power cord and make sure it is securely plugged into a functioning power outlet. Also, ensure there are no issues with the circuit breaker or electrical supply.

If none of these steps resolve the issue, it's recommended to consult the user manual or contact Norpole customer support for further assistance. They will be able to provide more specific troubleshooting steps or advise on potential repairs or service options.

7/3/2023 7:24:28 AM •Dehumidifiers•Answeredon Jul 03, 2023•100 views

6/30/2023 2:35:17 PM •Dehumidifiers•Answeredon Jun 30, 2023•164 views